Sync Device Templates
Hi ALL I try sync Device Template from ME side and have issue: Authorization failure. Please contact our support team at support@opmanager.com for further assistance.
Printer Status
Hi ALL I have test instance with 12.7.257 and it has some info - d0 a0 d0 b5 d0 b6 d0 b8 d0 bc 20 d0 be d0 b6 d0 b8 d0 b4 d0 b0 d0 bd d0 b8 d1 8f 2e 2e 2e 2e 20 20 What is it?
Build No 128168
Build No 128168 - February 27, 2024 OpManager: Around 20 device templates with basic monitors have been newly added for a wider support of device models during device discovery. where i can find list of this templates ?
One server template - many group of monitors
Hi ALL We have 300+ servers based by WinServer 2019/2022 Each of them is member of some group. Each group has "personal" set of monitors/thresholds/notification's. How i can mapped same "personal" set to many servers based on WinServer 2019 and 2022
Templates of Kyocera devices
Hi Team. Could you create and share templates for next Kyocera devices: 1) Kyocera ECOSYS M5526cdw (Color device ) 2) Kyocera ECOSYS M2540dn (BW device) 3) Kyocera ECOSYS P2235dn Each of them have same OID responses: sysDescr.0:-->KYOCERA Document Solutions
OpManager doesn't show the CPU, Memory, Backplane utilization
Hi, We use HP, 3Com, H3C switches HP10508 & H3C7503 in our network. Opmanager doesn't show the CPU, Memory, Backplane utilization of those devices. And those devices are not classified at the discovering process as switches and go to unknown category. I have to import from unknown category to switch or router category. is there any problem with mibs? THX Kit2000
Monitoring a Radio System SIAE / ELTEK / ICT / Orolia
We received OP Manager from Tait, a radio communications provider. I am trying to monitor many devices from different manufactures at different radio sites, they all support SNMP. OP Manager does not have the templates for the below devices: Vendor:
Unable to import device template
I have a PureStorage device template that I need to import. I got the template from the manageengine website. I get so far as to browse for the file, it opens and there it get stuck, it doesn't want to save, it just stays on that screen, I left it for
Build No 125638 - June 21, 2022
Hi ALL! OpManager: Around 165 new device templates have now been added for proper classification of devices during Network Discovery. OpManager: Around 271 new SNMP performance monitors are now added. OpManager: A few default performance monitors are
Cisco switch C1000-8P-2G-L Template
Hi ALL! I have Cisco switch C1000-8P-2G-L. Switch and i need to monitoring it... Who can share Device Template for this device ?? Thanks
Cisco C921 4P device template
Dear all can you provide us the cisco C921 4P router device template? Opmanager is wrongly discovering the named device and categorising it as a wireless controler, I've searched your template library but didn't find anything, not even anything for C900
IPMI monitoring for Lenovo and Cisco servers
i would like to be able to monitor IPMI for Lenovo and Cisco servers. could this functionality be added.
File Replication Services for Server 2012r2 false alarms
I am having issues trying to locate a way to override the two below mentioned alarms. Basically these are services that i do not need to watch for this particular server build out and would like to just remove the monitoring of the services. I
Template for Windows Server 2022
I have the latest version of Opmanager that came out Dec 24. I still can't see any devicetemplate for Windows server 2022. When will it be available?
Inventory report on Cisco stack switches
Hy, i have plenty switches 3750(stack of 3-4) and 2960 standalone switches(OID .1.3.6.1.4.1.9.1.1208). Is there a way i can get for all those chasises to apear in my inventory report? Now i just get blanks, an this is not something i wanna show to my
Switch interface is down (false alarm)
Hello, As there is only 4-5 year old topics about this, and with no answer to the question, I have to open a new one. I've got switches on the network. Some ports are ofcourse not used. Even if the port was never used (before and after OP Manager installation) OP Manager still alerts me that the interface is down. I know I can choose to not alarm me on these ports. But as I have 100~ switches im not amused to go through every singel switch to remove the option to not alert on the specific port.
monitoring desktop temperature
HI All, I am newborn to using opmanager and appreciate your answers. It is possible to monitor cpu's temperature of desktops devices which are in the network generally? i wanted to add a monitor my desktop device, so I select the vendor as MICROSOFT but
Microsoft RDS-Farm & OpManager
Hi ALL Anybody have successful story about monitoring RDS-Farms (RDS Broker + RDS Session Hosts) via OpManager ?? What parameters are monitoring ? maybe anybody can share own templates/custom monitors?
Catalyst 9500 48Y-4C template
Hi. I wonder if you know if the template of a Cisco 9500 48Y-4C is available in Opmanager? We were not able to find it. Regards
IPSLA Flows
Hi. We have a customer that has Opmanger with a build 12.5.315 and includes 90 NFA interfaces. They want to configure Cisco IP SLA features and they are handling around 10,000 flows per secon incoming to Netflow module (IPSLA Flows). I wonder if there
CPU Usage for all divices
Main dashboar has an CPU usage widget but i can only see Cisco devices and i wold like to see all switch brands in one widget, is that possible?
I can not upload a FORTINET-FORTIGATE-MIB.mib at MIB Browser on opmanger
I have fortigate 1000d firewalls and I want to moritor CPU and Memory. then I downloaded a Mib file on my firewall box and I got FORTINET-FORTIGATE-MIB file. It has size 235KB. then I used the opmanager browser to upload and I have got some error "MIB
snmp oid returns a valid value inside Mib browser, but timeout when adding the same snmp oid as monitor
Hi, When I test snmp oids on a device (which has correct snmp credetntials), I get correct response which indicates the connection works seamlessly: (credential are masked) But when trying the same snmp OId as a new monitor for the device (or device template),
Getting server current time in OpManager and its API
Hi, I need to get servers' current time in OpManager and access it via API. Apparently, the current time of servers isn't available in OpManager by default. If it's the case, How could I add it and also access that from OpManager's REST API? Would it be through adding a custom SNMP oid to a device profile? Thanks
Self Monitoring in OpManager
For more videos related to OpManager: https://www.youtube.com/playlist?list=PL0FkrkKW27nNxQjwszmwVnnmRDK77Meq7
Custom Performance Monitor - How to define NumericToString type?
I'm trying to create a custom monitor where the function expression is set to NumericToString, are there any guides on how this needs to be setup? The OID returns a value between one and 7 and I want to assign text strings to be displayed. Does this type actually do what I need? or does it simply convert the numeric 5 to a string "5"?
DELL SCv2020 template or SNMP monitors
Hi, has anyone created a template for Dell compellent SCv2020? Or created SNMP monitors for this storage? I can't figure out how to monitor it since there is no template available in OpManager. Thanks. Matias
Cisco Catalyst 9200L 48-port PoE Switch - template
Hi ALL! I have Cisco Catalyst 9200L 48-port PoE Switch and i need monitoring it ) Who can share Device Template for this device ?? Thanks
Monitoring Cisco Telepresence
Hello, I am trying to start monitoring Cisco TelePresence systems. I can see even, that if proper SNMP community string is provided, OpM discover the device out of the box. However - it is monitoring the device with availability only. My question is - did anyone succeeded in more detailed monitoring? like monitoring network interfaces (and its details, like drops etc.). Final scenario is monitor somehow "User Experience" - to be aware before bigger (more massive) issue comes. I would like to know
OpManager 12 problem reading SNMP values from UPS MIB
We have recently began using OpManager 12 from OpManager 11. We are doing a fresh install and migrating our items manually. I have run into a problem with OpManager 12 receiving SNMP data from our UPS system MIBs. It doesn't appear to be able to process or translate the MIB definitions correctly and will not return certain results. I have verified that I have included all necessary items required for the MIB definitions to process correctly but I still get the OID string which I do not appear to
Cisco Catalyst 9500 24 ports Switch - template
Hi ALL! I have Cisco Catalyst 9500 24 1/10/25G ports Switch and i need monitoring it ) Who can share Device Template for this device ?? My info: sysObjectID.0:-->.iso.org.dod.internet.private.enterprises.9.1.2573 *************************************************************************************************** sysDescr.0:-->Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.9.4, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c)
Device template with same name already exists
Hi, I was having an issue backing up our new Aruba switches. I noticed there was a new device template on the ME site, so downloaded the XML. Tried to import it and I get the error message "Device template with same name already exists." I deleted the devices associated to that template, I only had 3, and tried to reimport and I get the message "Device template with same name already exists." Decided to delete the original template from Settings --> NCM --> Device Templates and tried to reimport....same
Mikrotik Temperature via SNMP
Hi ALL i have Mikrotik router RB3011UiAS I tried get Temperature via SNMP. Mikrotik has IOD for it: [admin@MikroTik] > system health print oid voltage: .1.3.6.1.4.1.14988.1.1.3.8.0 temperature: .1.3.6.1.4.1.14988.1.1.3.10.0 i ADD this OID ( .1.3.6.1.4.1.14988.1.1.3.10.0) to custom monitor in OpManager but OpManager get temperature in x10 value real temperature (in mikrotik terminal or winbox) is 36 C in OpManager is 360 C Why???
Custom Monitoring using snmptable
Currently we can add the OID which can be use via snmpwalk command. Since its not available in Opmanager, We unable to monitor some parameter which can be found using snmptable command. e.g in F5, we want to monitored the Pool Member state.
Exagrid Monitoring
Hi Has anyone setup a template or any monitoring of an Exagrid before? I would like to monitor storage usage so that i get notified when 90% full, i have added the mib but need a little direction how i setup the monitor required and ideally a custom dial would be good. Regards Mike
Wrong Memory Utilization in Cisco ASR 1000-X
Hi, I have 4 Cisco ASR 1002-X routers monitored in OpManager. I just realized the Memory Utilization does not show the real condition. It shows 80%, but the fact is it only using 9%. And it happened only in ASR 1002-X routers series. OpMan: Router: Any other routers such as Cisco C800, ISR4331/K9, CISCO2901/K9, etc shows obviously. I'm figuring out how to fix this problem. Any help would be appreciated. Thank you
Device template for DELL EMC SCv2020 storage
Hi, is there any template for DELL EMC storage SCv2020? I can't find it. Thanks!
Device Template Logic Disk Space Monitoring (GB, MB, %): Allow inclusion and exclusions
Right now, the behavior to set the WMI monitor for Disk space is the threshold gets applied across all disks equally. In almost every infrastructure environment that creates unnecessary alerts for those volumes that need to have large amounts or percents. There should be an option to include or exclude specific volume drive letters. For example: If your environment has a SQL cluster, the Quorum drive is usually close to full but is very static. I would either want to set an exclusion or set a specific
I have tehe Cisco Nexus 5548 switch I need to added more device templates. Where I can to do download of the MIB to this device?
now on the last version we have 3 monitors, but I need others, I can´t find this information, thank you
Interface Monitoring
I've add some devices into my inventory. Then I decide to change default interface monitoring intervals. But it doesn't take effect to those interfaces which had been added to project. If I add a new device it works. I tried to apply changes to ALL interfaces and Selected interfaces but the result is still the same. It's really hard to remove and add devices again.
Next Page