I just setup a port on a Cisco 7606:

 

!
interface TenGigabitEthernet4/7
 description ATT ASE 1
 mac-address 001c.b0ca.0101
 bandwidth 10000000
 no ip address

 ip flow ingress

 ip flow egress
!

 

When we look at the conversations (with 10.223.250.53), we do not see the traffic that we wish to monitor.  However, we can see this information on the 7606 with the command below:

 

sh ip cache flow

!

Te4/7.2940       172.18.180.137        10.223.250.53     tcp      54117     443       1  

 

 

What are we missing here?  Do we need the ip flow statement on the subinterface as well?

 

 

Also, our interfaces are showing up as:

 

IfIndex100

 

Default SNMP Read Community - PUBLICR

Default SNMP Port - 161

 

7606 config:

 

snmp-server community PUBLICR view CPUKILL RO

 

Any help here would be appreciated