Disable Alarm for Cisco 3750

Disable Alarm for Cisco 3750

One of the Cisco devices we are monitoring has a known issue that makes it appear that there is a power supply issues when queried via SNMP.

Has been observed on WS-C3750X-48P stack switches running 12.2(55)SE3 or 12.2(58)SE1. 

"show env all" shows power supply status are ok, but snmpwalk of CISCO-ENVMON-MIB/ciscoEnvMonSupplyState shows that power supply 1 is faulty and not functioning (6)


The result is that we are continually getting the alert (I think from SNMP polling). 
Hardware Sensor Name : Sw2, PS1 Faulty, RPS NotExist. Category : power. Current State : notFunctioning(6) - The sensor is operating under critical or fatal conditions. This may directly affect the functioning of both the sensor and related components.

snmpwalk output:
------
SNMPv2-SMI::mib-2.47.1.1.1.1.2.1058 = STRING: "FRU Power Supply"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1058 = STRING: "Sw1, PS1 Faulty, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1058 = INTEGER: 6
SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.1058 = INTEGER: 2


I don't have a monitor setup looking at this OID in particular, so wondering where this polling is setup, and how can can exclude this from being monitored?
              New to ADManager Plus?

                New to ADSelfService Plus?