« Back
You are in :
Recent Topics »
OEMs & Developers »
Web NMS » How to wite a device simulator supporting multiple protocols
AdventNet Simulation Toolkit supports simulation of SNMP, TL1, TFTP, and FTP manageable devices. In addition, the latest version 5.0 Beta supports Cisco IOS Software Simulation for the router devices. The IOS support will provide the necessary options from the simulator to do a telnet to the device and operate commands on the CLI Interface.
Trap simulation is supported to configure and send asynchronous events from the simulated devices to the Management Server at different scenarios on a daily or periodical basis, at the specified time. An exclusive trap stormer tool is provided to configure and send any number of traps at the specified time-interval or at the burst mode.
Version 4 is available in the following url:
http://www.adventnet.com/products/simulator/index.html
The version 5.0 Beta is available in the following URL:
http://www.adventnet.com/products/simulatorbeta/index.html
For protocol specific configurations in Web NMS, refer to Management Protocols section of Developer Guide documentation. The online documentation is available at http://www.adventnet.com/products/webnms/help/developer_guide/index.html.
Revert for any further assistance.
Thanks and Regards,
Vidya
Trap simulation is supported to configure and send asynchronous events from the simulated devices to the Management Server at different scenarios on a daily or periodical basis, at the specified time. An exclusive trap stormer tool is provided to configure and send any number of traps at the specified time-interval or at the burst mode.
Version 4 is available in the following url:
http://www.adventnet.com/products/simulator/index.html
The version 5.0 Beta is available in the following URL:
http://www.adventnet.com/products/simulatorbeta/index.html
For protocol specific configurations in Web NMS, refer to Management Protocols section of Developer Guide documentation. The online documentation is available at http://www.adventnet.com/products/webnms/help/developer_guide/index.html.
Revert for any further assistance.
Thanks and Regards,
Vidya
Hi,
AdventNet Simulation Toolkit supports simulation of SNMP, TL1, TFTP, and FTP manageable devices. In addition, the latest version 5.0 Beta supports Cisco IOS Software Simulation for the router devices. The IOS support will provide the necessary options from the simulator to do a telnet to the device and operate commands on the CLI Interface.
Trap simulation is supported to configure and send asynchronous events from the simulated devices to the Management Server at different scenarios on a daily or periodical basis, at the specified time. An exclusive trap stormer tool is provided to configure and send any number of traps at the specified time-interval or at the burst mode.
Version 4 is available in the following url:
http://www.adventnet.com/products/simulator/index.html
The version 5.0 Beta is available in the following URL:
http://www.adventnet.com/products/simulatorbeta/index.html
- Latha
AdventNet Simulation Toolkit supports simulation of SNMP, TL1, TFTP, and FTP manageable devices. In addition, the latest version 5.0 Beta supports Cisco IOS Software Simulation for the router devices. The IOS support will provide the necessary options from the simulator to do a telnet to the device and operate commands on the CLI Interface.
Trap simulation is supported to configure and send asynchronous events from the simulated devices to the Management Server at different scenarios on a daily or periodical basis, at the specified time. An exclusive trap stormer tool is provided to configure and send any number of traps at the specified time-interval or at the burst mode.
Version 4 is available in the following url:
http://www.adventnet.com/products/simulator/index.html
The version 5.0 Beta is available in the following URL:
http://www.adventnet.com/products/simulatorbeta/index.html
- Latha
Post Actions
Corp