Restore deleted configuration (from trash)
Hi, Team, A customer of mine did some configurations, deployed them and then deleted and emptied the trash. Is there any way to check what the configuration was about? Checking the Audit Log Viewer I can see the actions (deploy, moving to trash and emptying
Access Denied error when executing post install custpom script
I modified installer (CorettoJRE, auto downloaded by EC, .msi), with: 1. Pre installation tasks: 1.1 - stop process java.exe 1.2 - stop process javaw.exe 1.3 - copy ca certs to temp dir 2. Installation task (not touched..) 3. Post installation task: 3.1
Executing powershell script on endpoints
I have a .ps1 script that searching the computer registry and is it finds a value in the case SecureCRT uninstall MSI string it then runs via PS invoking CMD to run the MIS part. I have tested the script on a few machines by running the .ps1 script on
Checksum error
Hi, I just get finally the installing of the Win 10 20H2 Feature Pack from patch management to works and run it for a single machine and it went ok, now when try to run the same patch on a different PC get this error: Downloading successful but checksum
Install software if hostname is greater then
Hello, Is it possible for a configuration to look at the hostname? Within our organization we use hostnames such as: LPT-800. What I would like, all hostnames higher than 800, Office 2019 is automatically installed here. And when hostname is less than
Configurations on Self-Service Portal
It would be a great addition to be able to publish configurations to the Self-Service Portal Stephen Fowles 3rd Line Support Technician North West Ambulance Service - NHS Trust
Uninstalling Dell Support Assist
We have had a few issues with some Dell machines and Support Assist eating up memory and making machines unusable. I am looking to uninstall it through Endpoint Central but the only info I have found is 4 years old and does not seem to be valid any more,
Organization of Configurations
Why are there not "folders" for example or some hierarchy options for configurations in EC? For example, there needs to be a way to place configurations that are "forever" in one folder, and then one off configurations in another folder. So you can keep
PII Policies
I am new to the DLP plus environment. I need to setup the following. Can this be done and how? Restrict and alert PII and PHI transfer (file upload or copy and paste content) through untrusted web services (such as FTP, social media platforms, unauthorized
Change Domaincontroller settings without Webconsole
Hi together, is it possible to change the settings of the domain controller without the webconsole. I've demoted my old dc and i forgot to set the new information in endpoint central. Now i can't log in. I hope anyone can help me by my mistake Greeting
Auto Restart
Hi, I am wondering if there is a feature or way we can easily schedule pop up messages to users via Endpoint Central requesting they restart and maybe even have a restart button. Also adding to this a deadline and forced restart after a certain amount
Deleting Old User Profiles in Windows
I'm looking for a way to remotely delete old user profiles from Windows machines. Is there a configuration or script I could create that could do this and delete user profiles that were last modified 90 days ago or anything similar?
Azure AD integration - Desktop Central Cloud
Hi We are using Desktop Central Cloud and can see where to setup AD integration with our on-prem AD Server, but is there a way to link and sync with Azure AD.
Deploy Immediately Option for Configuration Collections
Deploy Immediately Option for Collections This missing feature is a real problem for us. There is only a deploy option, and it takes a variable length of time for something that should be instantaneous across all targets. Thank you!
Custom start menu and taskbar
What is the best practice if I want to customize the taskbar and start menu on Windows computers with Desktop Central? When the domain user logs in to the computer I want my custom taskbar and start menu to be what the user's see with some apps pinned
Force immediate check for configuration changes.
Is there a way to bypass the 90 minute refresh cycle and force an agent to check for configuration updates other than rebooting the computer?
Desktop Central Agent cannot connect to server
On all clients, Desktop Central Agent cannot connect to server. All configuration updates on the server show Yet to apply. I've followed the troubleshooting without success. The error in Desktop Central Agent troubleshooter is "request was aborted could not create SSL/TLS secure channel" Any advice? thanks Simon
Apply wallpaper to MacOS, but the user still can change those wallpaper by themself.
Greeting, I have to deploy the desktop wallpaper for macOS user, it's successful, but the user still can change the wallpaper by themself. Is there any setting recommended for this matter? Thank you.
Manage config via API
Is it currently possible to manage configurations via the API? I'd like to be able to create, modify, and stop configurations via the api. I don't currently see that as an option in API Explorer.
client hardware defect move image to new hardware - which is the correct process
Hi, we move the Windows 10 image to new hardware, because some little problems with hardware components. Now, the computer is down in endpoint central und the last contact was before the changes. What is the correct process for ongoing management without
How can i delete Action Log Viewer?
hi. how can i delete all logs from Admin>Audit>Action Log Viewer in ManageEngine Endpoint Central 11 ?
Mac File Copy Operations not working
I have EPC agents running on our Macs at work and I am trying to copy some files/security tokens(txt) via a Configuration in EPC, and doing a HTTP copy where you put the files in the config and have assigned this to a Mac computer as a target. The issue
Deploying Office 365 Apps
How do you deploy an Office 365 Plan 2 Visio using ME? The installer that the user can download doesn't seem to work as a manage engine package. I can use ODT and config.office.com to create an XML file and then use setup /download to get the exe file.
Manual movement of computer in remote branches
Lets say I have 3 remote offices A, B and C. I have an IP scope for remote office A and B, remote office C is left for special needs computers that will have all different IP addresses. I manually add computers from both remote office A and B into the
Tôi không thể khởi động "Start ManageEngine Endpoint Central"
I can't start "Start ManageEngine Endpoint Central", it can't load the web-based admin dashboard. Can anyone assist me?
Check Hard Dirves mode RAID or AHCI ?
How to Check Hard Dirves mode RAID or AHCI via Endpoint Central?
How to deply a file to computers?
Hi, I need to deploy a certain file to a certain path to a group of linux computers. How do I achieve that?
Execution Summary Refresh
Perhaps it is just my instance but it appears that in order to see an update from the Execution Summary of deployment be-it a script or a software package you have to manually refresh it. That just seems counter intuitive to me, am I coming out of left
Doubts about Custom script config
Hi there, I want to distribute files to many macs and I found a script template in the repo called "CopyFromWebUrl.sh" but I was confused about the entries in the config page: the detail of the sh file: # Destination path of the file destinationPath="/Users/Shared/FileMaker/FileMaker
is refreshcycle not "random" per client?
I deployed a configuration to a large collection 30 minutes ago. I would have expected a third of them to be applied by now, since the refresh cycle is 90 minutes. But it dawns on me that I haven't actually seem anywhere, that the refresh cycle is a random
Deployment of WAN Agents to a group of Computers
Hi, we are planning the initial installation of Endpoint Central (cloud based) and i didnt find informations for the followin question: is it possible to deploy the WAN Agent in a remote office to a specific AD Group or a OU within the AD ? Or maybe to
server reboot process
I'm troubleshooting some issues on servers that only happen after patching from EndPoint Central. When we set a post deployment reboot in a policy how does the agent actually make the server reboot, does it call the shutdown.exe command, or some other
Continuously Deploy Software
I have a question inspired by the post here: Use Dynamic Groups for Software Deployment / Configuration (manageengine.com) If I have a piece of software that needs to be installed on all servers in a group, and automatically reinstalled if someone uninstalls
change the User-Invitation Mail Template
Hi, the link in the userinvitation mail template is false. How can i change the Template? Thanks and have a nice day. Greetings from Germany
Common Agent Across Manage Engine Platform?
Is there any planning for a common agent to function between all of your services? ADAudit+, ADManager+, Log360, LogAnalzyder, Endpoint Central all installing agents is creating all sorts of failure points, CPU overloads (at collection times), and multiple
Mr Arun. Your Signature is large size, and I cannot comment or reply to to you on previous topics.!
I have installed and configured the Endpoint Central and Secure Gateway on both servers. Endpoint central is available on the internal network, but it shows a white page on the Internet! it's - build 11.2.2335.03 You have asked this question. Share :
Endpoint Central shortcut configurations - Entered value cannot be a URL
Hi All I have been using the Shortcuts configuration to force URLs to open in a specific browser for ages by targeting the browser executable and specifying the URL in the Arguments box. Doing it this way also means I can force some urls into Kiosk mode
white page endpointcentral
I have installed and configured the Endpoint Central and Secure Gateway on both servers. Endpoint central is available on the internal network, but it shows a white page on the Internet! it's - build 11.2.2335.03 You have asked this question. Share :
On Perm Endpoint Central REST API inegration and disable 2FA for specific user / integration
Dear support, I am preparing REST API integration with an on perm endpoint central with has already enabled 2FA configuration. As mentioned in REST API doc below, the user authatication will have expiration date "remember_token_days" , which means every
Desktop Central doesn't work after Service Desk uninstall
Hi! I've uninstalled Service Desk, during it was asked if I wanted to delete both SDP and DC, I choose keep the DC. Now cant make the DC service run. Any thought?
Next Page