Configuration Netflow on cisco 4500-X (cat4500e-universalk9.SPA.03.07.00.E.152-3.E)

Configuration Netflow on cisco 4500-X (cat4500e-universalk9.SPA.03.07.00.E.152-3.E)

Hello

I have a pair of new Netflow 4500-X that i want to add to the Netflow Analyser (i have yet an ASA and it's working well).

I configure the 4500X as follow :

flow record NF-RECORD
 match ipv4 tos
 match ipv4 protocol
 match ipv4 source address
 match ipv4 destination address
 match transport source-port
 match transport destination-port
 collect interface input
 collect interface output
 collect counter bytes
 collect counter packets
 collect timestamp sys-uptime first
 collect timestamp sys-uptime last

flow exporter Manager
 destination netflowanalyser
 source Loopback0
 transport udp 9996
!
!
flow monitor NF-MONITOR
 exporter Manager
 cache timeout inactive 30
 cache timeout active 5
 cache entries 1000
 record NF-RECORD

And i apply it to vlan 10 (vlan 10 config / flow monitor NF-MONITOR input).
Try to apply to an Etherchannel too (int po3 / flow monitor NF-MONITOR input

The device appears on the interface, but with another interface that don't have any config. And the interface i have confgured do not appear (po3 and vlan 10). ;Try many things but don't know where to debug.


Thx if some has a config for a 4500-X Cisco


                New to ADManager Plus?

                  New to ADSelfService Plus?