Firewall Analyzer only opening ports for IPv6

Firewall Analyzer only opening ports for IPv6

Running OPM 12 with  12000_APIClientFix_Apr15th applied.

When I try to add my Palo Alto Networks PA-200 to FWA following the manual, no logs appear.

I can verify through tcpdump that packets are hitting udp/1514 on my OPManager server:

[root@opm12 bin]# tcpdump -nn | grep 1514
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
11:34:51.841734 IP 10.10.10.2.51800 > 10.10.10.101.1514: UDP, length 377
11:34:52.841823 IP 10.10.10.2.51800 > 10.10.10.101.1514: UDP, length 379
11:34:54.842109 IP 10.10.10.2.51800 > 10.10.10.101.1514: UDP, length 373
11:34:54.842117 IP 10.10.10.2.51800 > 10.10.10.101.1514: UDP, length 373


However nothing shows up in the UI for Firewall Log Analysis.

I'm able to monitor the firewall through SNMP.

When I check netstat on the OPManager server for which ports are opened I only get IPv6 UDP ports opened for my FWA syslog listeners:

[root@opm12 bin]# netstat -ln
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address               Foreign Address             State
tcp        0      0 127.0.0.1:32000             0.0.0.0:*                   LISTEN
tcp        0      0 0.0.0.0:22                  0.0.0.0:*                   LISTEN
tcp        0      0 127.0.0.1:25                0.0.0.0:*                   LISTEN
tcp        0      0 127.0.0.1:13306             0.0.0.0:*                   LISTEN
tcp        0      0 :::40928                    :::*                        LISTEN
tcp        0      0 :::49793                    :::*                        LISTEN
tcp        0      0 :::58146                    :::*                        LISTEN
tcp        0      0 :::46701                    :::*                        LISTEN
tcp        0      0 :::80                       :::*                        LISTEN
tcp        0      0 :::2000                     :::*                        LISTEN
tcp        0      0 :::22                       :::*                        LISTEN
tcp        0      0 ::1:25                      :::*                        LISTEN
tcp        0      0 ::1:13306                   :::*                        LISTEN
udp        0      0 0.0.0.0:68                  0.0.0.0:*
udp        0      0 :::514                      :::*
udp        0      0 :::519                      :::*
udp        0      0 :::35346                    :::*
udp        0      0 :::162                      :::*
udp        0      0 :::46121                    :::*
udp        0      0 :::41650                    :::*
udp        0      0 :::48055                    :::*
udp        0      0 :::6969                     :::*
udp        0      0 :::47418                    :::*
udp        0      0 :::69                       :::*
udp        0      0 :::41935                    :::*
udp        0      0 :::26837                    :::*
udp        0      0 :::43618                    :::*
udp        0      0 :::35945                    :::*
udp        0      0 :::1514                     :::*
raw        0      0 0.0.0.0:1                   0.0.0.0:*                   7


Please advise.

Thank you in advance.
              New to ADManager Plus?

                New to ADSelfService Plus?