OpManager not displaying the correct model for my devices.

OpManager not displaying the correct model for my devices.

Hi there,

Im having issues with the OpManager deployed at an enterprise. The issue is that, i have OpManager running and monitoring the switches at an enteprise, but the OpManager is not displaying the correct "model" for the switch that Im monitoring.

I have Cisco Catalyst 6500 series WS-C6509-E running and monitored by the OpManager, however in the EOL/EOS report that was produced, the OpManager displayed the switch as "6500 series 6509" which is different model than the switch running.

The question is, why does the OpManager displaying a different model for the switch?

Below is the output of the "show version" command of the switch itself:

cisco WS-C6509-E (R7000) processor (revision 1.2) with 458720K/65536K bytes of memory.
Processor board ID XXXXXXXXXXXX
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
18 Virtual Ethernet/IEEE 802.3 interfaces
184 Gigabit Ethernet/IEEE 802.3 interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

Below is the switch model displayed by the OpManager:

**Highlighted in red box


Below is the snapshot of the EOL/EOS report for the device :



-The actual switch model which is"Cisco WS-C6509-E" End of Life has not been announced yet by CISCO, but in this snapshot, the switch is already at the End of Support.

Any help would be appreciated.
Thank You.
              New to ADManager Plus?

                New to ADSelfService Plus?