Unable to Capture Outbound Traffic
Hi,
I'm using Cisco 7606s and GSR 12406 as my border. I'm unable to capture outbound traffic from the interface. Below is the config from my router. I have done a lil bit of research on how to over come this issue and it still i'm unable to resolve.
interface GigabitEthernet1/10
description 20Mbps Ethernet link to ISP-1 (2nd BGP)
bandwidth 10000000
ip address x.x.x.x 255.255.255.252
ip flow ingress
flowcontrol receive on
flowcontrol send on
service-policy input INBOUND-UPSTREAM
service-policy output OUTBOUND-UPSTREAM
ip flow-export source Loopback0
ip flow-export version 5
ip flow-export destination x.x.x.x 2559
ip flow-export destination x.x.x.x 9996
no ip http server
no ip http secure-server
ip tacacs source-interface Loopback0
Kanna
I'm using Cisco 7606s and GSR 12406 as my border. I'm unable to capture outbound traffic from the interface. Below is the config from my router. I have done a lil bit of research on how to over come this issue and it still i'm unable to resolve.
interface GigabitEthernet1/10
description 20Mbps Ethernet link to ISP-1 (2nd BGP)
bandwidth 10000000
ip address x.x.x.x 255.255.255.252
ip flow ingress
flowcontrol receive on
flowcontrol send on
service-policy input INBOUND-UPSTREAM
service-policy output OUTBOUND-UPSTREAM
ip flow-export source Loopback0
ip flow-export version 5
ip flow-export destination x.x.x.x 2559
ip flow-export destination x.x.x.x 9996
no ip http server
no ip http secure-server
ip tacacs source-interface Loopback0
Kanna