WAN RTT Monitor with Cisco ASA5505
Hi All,
I have a Cisco ASA 5505 already configured with SLA Monitoring as follows:
# sh run sla mon
sla monitor 10
type echo protocol ipIcmpEcho 192.168.0.1 interface outside
num-packets 3
timeout 3000
threshold 3
frequency 10
sla monitor schedule 10 life forever start-time now
It's working very good:
# sh sla mon op
Entry number: 10
Modification time: 16:36:36.320 CST Thu May 17 2012
Number of Octets Used by this Entry: 1480
Number of operations attempted: 77
Number of operations skipped: 0
Current seconds left in Life: Forever
Operational state of entry: Active
Last time this entry was reset: Never
Connection loss occurred: FALSE
Timeout occurred: FALSE
Over thresholds occurred: FALSE
Latest RTT (milliseconds): 1
Latest operation start time: 16:49:16.314 CST Thu May 17 2012
Latest operation return code: OK
RTT Values:
RTTAvg: 1 RTTMin: 1 RTTMax: 1
NumOfRTT: 3 RTTSum: 3 RTTSum2: 3
I want to monitor the SLA using the WAN RTT Monitor, I already have the device added to OpManager and the snmp info is being gathered perfectly as well as the snmp traps are being received.
My issue is that I can't find a way to add the ASA5505 to the WAN RTT Monitor.
Any ideas or suggestions?
Thanks in advance.
New to ADSelfService Plus?